[RE-wrenches] Replacing Xantrex GT 100 - Positive grounded system

David Buckner dbuckner at solaresystems.com
Mon Jun 10 16:50:33 EDT 2019


Circling back on this, it was suggested I check out this company:  http://alenconsystems.com/news/alencon-solectria/

Pretty interesting.  First we're going to try changing the motherboard and getting the GT100 back up and running, but if that doesn't work maybe we'll give this a try.

David


From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of David Buckner
Sent: Thursday, June 6, 2019 4:05 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Replacing Xantrex GT 100 - AC grounded system

Thank you, Jerry.  It's 480Vac.

On Jun 6, 2019 1:09 PM, Jerry Shafer <jerrysgarage01 at gmail.com<mailto:jerrysgarage01 at gmail.com>> wrote:
David
We had a very high Hi-Q failure rate and the test h said we three options,1, in advance send in the failed unit. Wait till one is available to release to the RMA, 3, buy extras so we dont need to wait and they had plenty in stock to sell but not to be the RMA. That really was my final straw. You might want to look at segmentating the combiner and going with manageable inverters, what AC side voltage are you running.
Jerry


On Thu, Jun 6, 2019, 9:15 AM David Buckner <dbuckner at solaresystems.com<mailto:dbuckner at solaresystems.com>> wrote:
Thanks Jerry.  Yes, there is a single combiner box.  I believe it's 49 strings of 11 Sunpower 220's, positive grounded.

Regarding Hi-Q, how many failures did you have?  Maybe we order some spares to limit downtime when one fails.  Are they any better now that they're called Pro Harvest?

David

On Jun 5, 2019 10:30 PM, Jerry Shafer <jerrysgarage01 at gmail.com<mailto:jerrysgarage01 at gmail.com>> wrote:
David
We had a real issue with Hi-Q warranty replacements, it took months. Does this GT System have a combiner that you could go with any of the three phase inverters. Just a thought
Jerry

On Wed, Jun 5, 2019, 2:11 PM David Buckner <dbuckner at solaresystems.com<mailto:dbuckner at solaresystems.com>> wrote:
Hi all,

We are working with a Xantrex GT 100 that appears on it's last legs.  Schneider shipped a matrix and we installed it but that didn't work.  Now they say we need to install a CCU and new motherboard.  I believe I have all this right.  If there is a way to replace the whole inverter with a legacy 600Vdc inverter instead, I'd do that.  Any ideas on were to get those?  Solectria PVI 95 seems like it would work.  Otherwise our engineer could look at retrofitting the system with Hi-Q inverters.  Any wisdom here would be greatly appreciated!

David


--
David Buckner
President

Solar Energy Systems, LLC.
1205 Manhattan Avenue
Suite 1210
Brooklyn, NY 11222-1058

ph 917-848-0215
e  dbuckner at solaresystems.com<mailto:dbuckner at solaresystems.com>



_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>

Check out or update participant bios:
www.members.re-wrenches.org<http://www.members.re-wrenches.org>

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>

Check out or update participant bios:
www.members.re-wrenches.org<http://www.members.re-wrenches.org>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190610/dfb5b0d7/attachment.htm>


More information about the RE-Wrenches mailing list