[RE-wrenches] Enphase inverters with trackers?

[Mac Lewis]

Hi Chris,

I don't think you'll have an issue but you may be clipping for a more
substantial part of the day than a fixed mount.  Depends on the module
selection.

Thanks



On Thu, May 30, 2019, 11:39 AM Christopher Warfel <
cwarfel at entech-engineering.com> wrote:

> We are looking at using Enphase IQ7 on a 12 module tracker.  Enphase has
> said this has been done, but they don't have any information on them,
> other than what they see via the data.  I am wondering if anyone has
> done this and were there any problems that they had that they would be
> willing to share.  Thank you in advance, Chris Warfel
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190530/c1f7c895/attachment.htm>