[RE-wrenches] trace sw remote display cable

[Brian Mehalic]

I'm pretty sure those are different cables, even though they both have the
same 25-pin connector on both ends (the SWI cable has fewer conductors than
the remote cable). It says right on the inverter to only use the special
SWI cable for stacking, and the literature refers to them as different
cables multiple times, while never mentioning that they can be used
interchangeably.  BTW, I'm really just passing this info on from Ed E!

Brian Mehalic
NABCEP Certified Solar PV Installation Professional™ R031508-59
National Electrical Code® CMP-4 Member
(520) 204-6639

Solar Energy International
http://www.solarenergy.org

SEI Professional Services
http://www.seisolarpros.com



On Mon, May 20, 2019 at 9:34 AM jay <jay.peltz at gmail.com> wrote:

> Does anyone know if the remote display cable is the same as the stacking
> cable?
>
> For the trace/xantrex SW.
>
> thx
> jay
>
> peltz power
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190520/873cb5a0/attachment.htm>