[RE-wrenches] Bus bar battery jumpers

[Starlight Solar Power Systems]

Sorry Drake, I should read better…you said Concorde.
Larry



On Apr 30, 2019, at 12:42 PM, Starlight Solar Power Systems <larry at starlightsolar.com> wrote:

Hi Drake,

The way I wire them is to place them side by side and flip every other battery 180°. Then you can use a interconnect cable without tight bends. I attached a diagram as it is easier to see than to describe.

Larry Crutcher
Starlight Solar Power Systems


<untitled.pdf>



On Apr 30, 2019, at 9:26 AM, Drake <drake.chamberlin at redwoodalliance.org <mailto:drake.chamberlin at redwoodalliance.org>> wrote:

Hello Wrenches,

I am wiring a set of 2 V Concorde batteries for 48 V. Each battery has 2 terminals which will be about 2 1/2 inches away from the terminals they will be wired to. Standard battery jumpers would be ridiculous in this situation. Busbars would be clean and efficient. Concorde doesn't have a solution.

Does anyone know of a source for busbars?

Thank you,

Drake 

 <>Drake Chamberlin
Athens Electric LLC
OH License 44810
CO License 3773
NABCEP Certified Solar PV 
740-448-7328
http://athens-electric.com/ <http://athens-electric.com/> 




_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190430/36b18e5b/attachment.htm>