[RE-wrenches] 1 kW 120 Vac grid tied inverter

Solar dahlsolar at gmail.com
Mon Apr 29 19:52:22 EDT 2019


The SMA 1000 was 120V output. I saw one a while back on eBay. 

The SMA 700 are nice little units for training. The input window is tight with newer modules. The input max current is pretty low. 

Jesse Dahl

NABCEP PV Installation Professional
IBEW Local 292 - Electrician 
Electrical/Solar PV Instructor - HCC

Sent from my iPhone

> On Apr 29, 2019, at 5:04 PM, Christopher Warfel <cwarfel at entech-engineering.com> wrote:
> 
> If it is going to be grid tied, non of the small inverters that I know of will be UL listed and they cannot be used. I also think they are all stand alone in any case. We use a fair number on boats and on the oyster farm.  I think the smallest that I can think of is Outback GTFX at 3000 watts, 120VAC, but you probably already looked at that.  Chris
> 
>> On 4/29/2019 10:12 AM, Jay wrote:
>> Hi peter. 
>> 
>> Check amazon or eBay etc. lots of cheap Chinese small inverters. 
>> 
>> Jay
>> 
>> 
>> On Apr 28, 2019, at 8:18 PM, Peter Parrish <peter.parrish at calsolareng.com> wrote:
>> 
>>> I replaced a number of AES (?) 120 Vac 1 kW grid tied inverter back when I was just starting out (2000) There was one poor design element with the DC fuse holders that I discovered and was able to work around, but I usually advised my clients to swap these inverters out for the SMA SWR 2500 and add some PV panels into the mix. I kept a couple of the AES 1000s for a while and then finally gave them to our local scrap metal purveyor.
>>>  
>>> I have a 900 W off-grid system that I used to haul around to “green events”. Blue Sky CC, Xantrex 1000 W inverter, 24 V AGM battery set. But as time goes by I spend very little time demoing this big an off-grid system, and I wish I had an AES-1000 to covert my seldom-used off-grid system into a revenue producing grid tied system.
>>>  
>>> Did anyone else keep a working AES-1000 (or low power grid tied inverter) that works and would be willing to part with it for a modest sum. Is there a solid  ~1,000 W 120 Vac grid tied inverter out there on the market?
>>>  
>>> My system is comprised of five (5) Tata 180s. Vmpp=35.8 V.
>>>  
>>> Peter
>>>  
>>> Peter T. Parrish
>>> SolarGnosis
>>> 1107 Fair Oaks Ave. Ste. 351
>>> South Pasadena, CA 91030
>>> (323) 839-6108
>>> peter.parrish at solargnosis.com
>>>  
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>> 
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>> 
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>> 
>>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>> 
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>> 
>>> Check out or update participant bios:
>>> www.members.re-wrenches.org
>>> 
>> 
>> 
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190429/c69a588c/attachment.htm>


More information about the RE-Wrenches mailing list