[RE-wrenches] Micro inverter OCP

[Nick Soleil]

Hi Jay,


ArcFault protection is only required for systems operating over 80V, so isn't required for most microinverters.


Enphase microinverters include ground-fault protection integral to the microinverters and the GFI can be reset if it trips.  Enphase provides instructions on reseting a tripped GFI in our Envoy Installation Manuals, including in this doucment:

https://enphase.com/sites/default/files/downloads/support/IQ-Envoy-Manual-EN-US.pdf#page=40


Cordially,

Nick Soleil

Enphase Energy Senior Product Manager, Envoy and Accessories

(707) 763-4784 x7267  // office

(707) 321-2937  // cell

Powering What’s Next™ | The Enphase Energy Management System<https://enphase.com/en-us/products-and-services/envoy>

NABCEP Certified Solar PV Installer #03262011-300

California C10 Licensed Electrician #986315


________________________________
From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> on behalf of Jay <jay.peltz at gmail.com>
Sent: Thursday, April 25, 2019 7:15 AM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] Micro inverter OCP

EXTERNAL EMAIL - Use caution when responding, clicking, and/or downloading attachments.





Hi all,

For micro inverters,  what OCP is available for ground fault ( or arc fault)
for roof top mounted on a living structure?

Thx
Jay


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>

Check out or update participant bios:
www.members.re-wrenches.org<http://www.members.re-wrenches.org>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190425/eae7e7c8/attachment.htm>