[RE-wrenches] Magnum Inverters - Digital Clocks Losing Time?

Christopher Warfel cwarfel at entech-engineering.com
Mon Apr 1 08:56:22 EDT 2019


I would think it has to be frequency. What else could shift the time?  
Up until about 2 years ago we were a grid isolated system and no one 
could use a plug in the wall clock. It takes just a very little off 60 
Hz for a clock to keep incorrect time. Being off .5 Hz will result in 
42,300 cycles in one day. When I worked in power plants the frequency 
was a digital display to the 6th place I think. The operator said if 
that decimal place was off by more than 2 from ISONE, it would trip off 
line. The steam turbines would be destroyed otherwise. Chris

On 4/1/2019 7:08 AM, Rich Nicol wrote:
>
> Hello Wrenches
>
> I have a site with two PAE 48v Magnum inverters stacked. System 
> voltage fluctuates ~ +/- 4 volts ranging from 243 to 247. Evenly split 
> on the two lines.
>
> Site has a few electrical peculiarities I haven’t seen on the many 
> other sites I have with Magnum inverters. Among those is three digital 
> clocks on appliances that lose ~ 5 min per day consistently. A forth 
> clock which is on a weather station with a transformer where it plugs 
> into a receptacle keeps time and of course the computers do as they 
> are web connected.
>
> I checked all neutral connections and verified proper N-G bond.
>
> All connections appropriately torqued.
>
> My recollection is the modest voltage swings are within Magnum spec. 
> But its constantly moving about which seems somewhat suspect to me.
>
> Any suggestions?
>
> Thanks
>
> RIch
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190401/f61f78a7/attachment.htm>


More information about the RE-Wrenches mailing list