[RE-wrenches] Crimper for Enphase field wireable connectors

[Nick Soleil]

Hi Jason,


The Field Wireable Connectors Installation Guide specified the following crimping tools for use with the connectors: Multi-Contact PV-CZM-18100, -19100, or -22100.  That tool is required for meeting our reliability requirements and compliance requirements.


The document can be found here:

https://enphase.com/sites/default/files/downloads/support/Q-Field-Wireable-Connectors-QIG-EN-US.pdf


Cordially,

Nick Soleil

Enphase Energy Senior Product Manager, Envoy and Accessories

(707) 763-4784 x7267  // office

(707) 321-2937  // cell

Powering What’s Next™ | The Enphase Energy Management System<https://enphase.com/en-us/products-and-services/envoy>

NABCEP Certified Solar PV Installer #03262011-300

California C10 Licensed Electrician #986315


________________________________
From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> on behalf of Jason Szumlanski <jason at floridasolardesigngroup.com>
Sent: Thursday, March 7, 2019 3:03 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Crimper for Enphase field wireable connectors

I have the Rennsteig now. I wasn't sure if it is ok to use since it's not the exact specified model in the Enphase instructions. There are all kinds of knock offs for under $50 and I have found a couple that seem to work extremely well, but again I'm not sure if it violates the listing to do so.

Jason Szumlanski
Principal Solar Designer
Florida Solar Design Group

On Wed, Mar 6, 2019, 9:16 PM Jay <jay.peltz at gmail.com<mailto:jay.peltz at gmail.com>> wrote:
Hi Jason

Talk to Bryan at PV cables

707-923-3000

He’s got the Rennsteig tool for under $200 and the MFG tool for just under $300

Jay

Peltz power.

> On Mar 6, 2019, at 2:20 PM, Jason Szumlanski <jason at floridasolardesigngroup.com<mailto:jason at floridasolardesigngroup.com>> wrote:
>
> Is there a reasonably priced alternative to the Multi-Contact PV-CZM-##100 models? These are the only ones specified in the quick install guide. Obviously I don't want to violate the listing, but I also don't want to spend $500 for a tool for each truck.
>
> Jason Szumlanski
> Principal Solar Designer
> Florida Solar Design Group
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>
>
> Check out or update participant bios:
> www.members.re-wrenches.org<http://www.members.re-wrenches.org>
>
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>

Check out or update participant bios:
www.members.re-wrenches.org<http://www.members.re-wrenches.org>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190308/3e5f27ee/attachment.htm>