[RE-wrenches] Corrugated Metal - Odd Seam Profile

[Jason Szumlanski]

Have you looked at the Proteabracket?

Jason Szumlanski
Principal Solar Designer
Florida Solar Design Group

On Thu, Feb 14, 2019, 12:05 PM Sam Haraldson <sam at onsiteenergyinc.com wrote:

> Wrenches,
>
> I have encountered a corrugated metal seam profile that doesn't fit the
> standard S-5! Corrubracket we typically employ.  I'm looking for alternate
> solutions if you will, please.   The corrugation pattern is 1-1/4" from
> "ridge" top to "ridge" top and the depth of the "valley" is 1/4".  A
> drawing is attached explaining this further.
>
> --
> *Sam Haraldson*, Installation Manager
> <https://onsiteenergyinc.com/about-us#haraldson>
> OnSite Energy, Inc.
> NABCEP PV Pro #PV-042217-016714
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190214/ed8ddae0/attachment.htm>