[RE-wrenches] Curved solar mounting

[pgiroux at mindspring.com]

Jason

 

    Last year we installed a system on a quonset hut structure. Used a clamp from S-5 ( Protea bracket I believe ) and Iron ridge x-100 rails. Between the brackets, self-tapping screws from Tringle and the rail it was amazingly strong.

 

peter

 

From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of Jason Szumlanski
Sent: Thursday, February 7, 2019 9:06 AM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] Curved solar mounting

 

Hi all,

 

I'm looking for some ideas for attaching modules to a curved carport system. I attached a concept drawing. I'm pretty dead-set on through bolting to the frames, but bottom clips would probably work if using an off-the-shelf rail system. Any products or picture you can supply would be very helpful.

 

The uprights pictured are already determined. It's a 20' radius curve. I'm assuming it will be steel tube bent to that radius. The total length will be much longer than what is pictured. The general contractor is willing to entertain any welded or bolted solution for the structure.

 

Thanks!

 

Jason Szumlanski

Florida Solar Design Group

 

	
	
	
	

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190207/a1b7298d/attachment.htm>