[RE-wrenches] VFX blinking error codes
Tump
tump at swnl.net
Fri Jan 4 06:11:26 EST 2019
Give Kris a call was w/ OB, refurbishes boards and is quite helpful; 425 233 0731. I have cced him.T
> On Jan 3, 2019, at 9:41 PM, <bruce at willpowerelect.com> <bruce at willpowerelect.com> wrote:
>
> Hi,
>
> Usually very successful with just replacing control and ac boards in older vfx to bring them up to compatibility with Mate 3 or 3s. When testing with 3 nine volt batteries, this one gives error code of ac and error blinking 3 times and batt low on 4th blink. Relay indicator also flashing, and vent fan does not come on. Ribbon cables are both new and well seated. Does anyone know what this code means?
>
> Thanks!
>
> Bruce Fiero-RMI
>
> <sigimg0.jpeg>
>
> "Energizing the Rogue Valley"
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
> Tump at swnl.net <blocked::mailto:Tump at swnl.net%22%20%5Co%20%22blocked::mailto:Tump at swnl.net> www.SWNL.net <blocked::http://www.swnl.net/%22%20%5Co%20%22blocked::http://www.swnl.net/>
> Solarwinds Northernlights
> Serving Mid Coast Maine & Northern California
> 207-832-7574 Cl. 610-517-8401
> Blair "TUMP" May
> ******** MAINE'S CHARTER ********
> NABCEP "Certified PV Installer"
>
> ******** MAINE'S CHARTER ********
> Trace Xantrex "Certified" Dealer / Installer"
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190104/9e6bb70f/attachment.htm>
More information about the RE-Wrenches
mailing list