[RE-wrenches] VFX blinking error codes

[Ray]

Not sure, but maybe the fan wire got damaged during the board 
replacement?  The wires are really tight and delicate.  I would think 
when it ran through its start up check and didn't have fan operation it 
would mess it up.

Ray Walters
Remote Solar
303 505-8760

On 1/3/19 7:41 PM, bruce at willpowerelect.com wrote:
> Hi,
>
> Usually very successful with just replacing control and ac boards in 
> older vfx to bring them up to compatibility with Mate 3 or 3s. When 
> testing with 3 nine volt batteries, this one gives error code of ac 
> and error blinking 3 times and batt low on 4th blink. Relay indicator 
> also flashing, and vent fan does not come on. Ribbon cables are both 
> new and well seated. Does anyone know what this code means?
>
> Thanks!
>
> Bruce Fiero-RMI
>
>
> "Energizing the Rogue Valley"
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190103/847ee255/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sigimg0
Type: image/png
Size: 4536 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20190103/847ee255/attachment.png>