[RE-wrenches] Kohler generator 1/2 voltage

[Kirk Herander]

I just discovered that the controller has to be programmed to the proper wired voltage and frequency. I’m having a generator tech check on that. He recently replaced the AVR board I’m now told, but didn’t take any measurements, I guess.

Kirk Herander


> On Nov 9, 2018, at 6:27 AM, Evan M <emerkel15 at gmail.com> wrote:
> 
> Once upon a time I was certified to work in those things but it's been a while. Do you have a spare AVR board on hand you can try swapping in to rule out AVR issues?
> 
> // Evan
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
>