[RE-wrenches] Raised up ground mounts

[Jay]

Iron ridge has a 3” option



> On Sep 20, 2018, at 2:15 PM, Jason Szumlanski <jason at floridasolardesigngroup.com> wrote:
> 
> 
> I wish! 180mph, Exposure Category D - about as bad as it gets in the US. I don't think pole mount will work around here. We need a really beefy structure. It's probably going to have to be custom... and expensive...
> 
> 
>> On Thu, Sep 20, 2018 at 11:10 AM Lorenzo Ortiz <lorenzo at cal-solar.com> wrote:
>> We've used DPW also with good results. We design for 110 mph winds out here and, depending on how high you go, can require some pretty beefy SCH80 8"-10"D pipe.
>> MT Solar might be something to look at too. They make multi-pole mounts for larger arrays but can get a little pricey.
>> 
>> Good luck!
>> 
>> 
>>> On Thu, Sep 20, 2018 at 4:55 AM, Jason Szumlanski <jason at floridasolardesigngroup.com> wrote:
>>> Any suggestions for ground mount racks where panels need to have the leading edge 6-8 feet above grade (due to flood level requirement)? Also, high wind area... 100kw system rating. Tilt can be as low as 5-10%. We're getting into carport territory here, but I'm trying to keep the cost reasonable since it won't have a dual function like a carport or shade structure. 
>>> 
>>> Jason Szumlanski
>>> Florida Solar Design Group
>>> 
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>> 
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>> 
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>> 
>>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>> 
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>> 
>>> Check out or update participant bios:
>>> www.members.re-wrenches.org
>>> 
>>> 
>> 
>> 
>> 
>> -- 
>> Loren Ortiz   Commercial PV Designer
>> 
>>     loren at cal-solar.com  (530) 274-3671
>>   
>> 
>> 
>> 
>> Showroom located at: 149 E Main St. Grass Valley, CA 95945
>> _______________________________________________
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180920/d8e9e7ce/attachment.htm>