[RE-wrenches] Raised racking system

[Benn Kilburn]

If budget and engineering allows, get I-beams cut to 3’ lengths with a plate welded on either end and bolt them down to the concrete roof?

Benn Kilburn
SkyFire Energy
780-906-7807

> On Sep 19, 2018, at 11:08 AM, Chris Mason <cometenergysystems at gmail.com> wrote:
> 
> I'm quoting a job on a concrete roof with three foot parapet walls. I'd like to raise the arrays about 24 inches above the roof to minimize shading, does any one have a solution for this application? 
> 
> -- 
> Chris Mason
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180919/66ec45d7/attachment.htm>