[RE-wrenches] Low voltage DC

Marco Mangelsdorf marco at pvthawaii.com
Wed Sep 12 21:26:53 EDT 2018


Aloha all,

 

At the risk of whacking at a hornet’s nest…lower voltage DC is soooo 80s and 90s especially when it comes to grid-tie applications with battery storage.

 

The time of OutBack and Schneider and all the others doing 48VDC is drawing to close.  Enough already.  Thank you for your service.

 

The sooner the industry fully migrates to higher voltage DC (Tesla, LG Chem, BYD and others), the better.

 

marco

 

From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Peter Giroux
Sent: Wednesday, September 12, 2018 3:03 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Any thoughts on this approach to adding battery backup to an existing grid tie system will be appreciated.

 

Ken

 

  We have had terrific success with AC Coupling. Yes there are some differences from Dc Coupled systems but if built properly, customer is willing to learn how to use it and maintain it and you put the correct relays in to shut off the string inverters if battery voltage gets to high, great.

 

  If you have a customer that refuses to exercise the system, not check the batteries if they are fla's and overloads it when the power goes down then not so cool. We have customers that power shave with it, have had backup power for days until the power came back on as they monitored the loads and were judicious about use. Ray is right in the sense the customer needs to learn how to use the system or they can royally screw it up ( yes we have had two do this, one learned the other not ).

 

  The Radians have been great work horses for this application, sadly as Ray mentioned Outback has moved away from it as a primary solution. 

 

peter giroux

ASAE

Atlanta

----- Original Message ----- 

From: Ken Schaal <mailto:Ken at commonwealthsolar.com>  

To: RE-wrenches <mailto:re-wrenches at lists.re-wrenches.org>  ; Ken Schaal <mailto:cwsolar1 at gmail.com>  

Sent: Wednesday, September 12, 2018 8:11 PM

Subject: [RE-wrenches] Any thoughts on this approach to adding battery backup to an existing grid tie system will be appreciated.

 

https://www.youtube.com/watch?v=eyhkIfS5Z-Q

  _____  

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180912/2a703d99/attachment.htm>


More information about the RE-Wrenches mailing list