[RE-wrenches] Trackers

Jay jay.peltz at gmail.com
Thu Sep 6 21:28:19 EDT 2018


Hi Chris,

In regards to wattsun, which controller are they using?  The website doesn’t give any details. 
The last one I did used a quite complicated one and it didn’t have easy to use external manual controls. 

Thx
Jay
Peltz power. 

> On Sep 6, 2018, at 1:13 PM, Chris Schaefer <chris at solarandwindfx.com> wrote:
> 
> Chris,
> 
> I've been using both All Earth Renewables (AER) and Array Tech. I really like AER but the smallest they make is a 20 module rack. I use their 24 module (60 cell) rack with a 320 to 335 watt module in my offgrid projects. One of the reasons I like AER is because of the GPS tracking, no sensor to block with snow. It is a very durable unit. Prior to AER I used Array Tech. They have been sold off from wattsun and have made some upgrades with their linear actuators but haven't installed a new unit since switching to AER 4 years ago. The AT holds 12 60 cell modules. Feel free to call if you'd like some more detail.
> 
> Christopher 585-748-1870
> 
>> On Thu, Sep 6, 2018 at 12:12 PM, <chris at oasismontana.com> wrote:
>> Hi Folks:  I appreciate the input but I am looking for TYPES of trackers that you may be selling (and yes, I told him about adding more & cheaper solar modules than investing in a tracker, but it’s the customer’s decision).  Zomeworks is not what the client wants; I would prefer dual axis; the customer’s in north central CA with a good resource.  I say go with Array Technologies but I would think there must be something new and improved by now.
>> 
>>  
>> 
>> --Chris Daum/Oasis Montana
>> 
>>  
>> 
>>  
>> 
>> From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of Dana
>> Sent: Thursday, September 6, 2018 9:18 AM
>> To: 'RE-wrenches' <re-wrenches at lists.re-wrenches.org>
>> Subject: [RE-wrenches] Trackers
>> 
>> 
>> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180906/353c055d/attachment.htm>


More information about the RE-Wrenches mailing list