[RE-wrenches] Bi-Directional / Netmetering question

[Lorenzo Ortiz]

 Fun fact: Sometimes the stickers on the CT's are incorrect too. Had that
happen and took forever to figure out...

On Wed, Aug 15, 2018 at 4:10 PM, Kirpal <solarworks at gmail.com> wrote:

> Jason...not sure about the Enphase consumption monitoring, if it is done
> with CT's confirm that your CT's are facing the right direction.  Some CT's
> are directional and perhaps your consumption monitoring could be backwards
> instead of the utility meter wiring backwards.....Seems like the utility
> would have noticed incorrect wiring in their can.
> We use the E Gauge CT clamps for some monitoring and they are
> directional.  I am not familiar with the Enphase versions.
>
>
> Sunny Regards,
> Kirpal Khalsa
> Oregon LRT#25
> NABCEP Certified PV Installation Professional
> Oregon Solarworks LLC
> www.oregonsolarworks.com
> 541-299-0402
>
> On Wed, Aug 15, 2018 at 4:01 PM, Jason Szumlanski <jason@
> floridasolardesigngroup.com> wrote:
>
>> Is it possible for a utility meter to be programmed/wired backward? I
>> have a client on an Enphase system with production and consumption
>> monitoring, and the Enphase monitoring is showing solar production exceeded
>> consumption by 400 kWh for a billing period. However, the meter is reading
>> almost exactly the opposite. It seems too coincidental.
>>
>> I'm going to go out to the site tomorrow to shut down all of the loads
>> and see what happens when solar is only backfeeding the meter, but I'm
>> curious how the meters are "programmed" or set up to work.
>>
>> Note that the meter was zeroed to start and the initial billing period
>> readings show DEL exceeded REC by 400 kWh, which matches what was billed
>> (net usage of positive 400 kWh).
>>
>> Jason Szumlanski
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re
>> -wrenches at lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>>
>>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
> org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
*Lorenzo Ortiz   Commercial PV Designer*

    lorenzo at cal-solar.com*  (530) 274-3671*

-- 
 <http://californiasolarco.com/referral-program/>
*Showroom located at: 149 
E Main St. Grass Valley, CA 95945*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180816/2dd0b530/attachment.htm>