[RE-wrenches] Rapid Shutdown Off Grid

Jeremy Rodriguez allsolarjeremy at msn.com
Tue Aug 14 23:42:46 EDT 2018


We’ve installed many Midnite BHs with the disconnecting combiners (and battery disco modules pre 2017 NEC.)
Recently we set up a roof mounted array with the disconnecting HV combiner along with the SOB for the PV Side of the CC. Worked well.
I’d be interested in the OB gear as well.


Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
1463 M St
Penrose Colorado 81240

Sent by Jeremy's iPhone. Sorry for typos and shorthand.

On Aug 14, 2018, at 5:45 PM, Ray <ray at solarray.com<mailto:ray at solarray.com>> wrote:

Hi All;

Its time to beat this poor dead horse again:  What is the latest, greatest ways to comply with 690.12 for lower voltage 150 Voc array with a charge controller in an off grid system?  At the moment, we are planning on using Midnite's new SOB system, and were told that while it won't work with most charge controllers, that it does work with Magnum's PT 100.  I'd like to hear from folks that have done this, any problems you've had, and also an explanation of why their transmitter is powered by 12 vdc, and not 24 or 48 vdc.    We definitely don't want to have the PV array dependent on AC power, so their AC transmitter is out.  If the inverters shut down from low battery voltage, the last thing we want is for the array to shut off too.

I've done a few Birdhouse setups and found them to be fatally flawed. If there is a nuisance trip, (seemingly relatively common) the customer had to scale the roof to reset the PV array to "ON". I'm also looking at Outback, but it seems prohibitively expensive.

Thanks,

--
Ray Walters
Remote Solar
303 505-8760

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>

Check out or update participant bios:
www.members.re-wrenches.org<http://www.members.re-wrenches.org>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180815/422a9b0d/attachment.htm>


More information about the RE-Wrenches mailing list