[RE-wrenches] M210 Enphase

[William Dorsett]

We’ve had remarkable good response from Enphase replacing old inverters.  With swelling and oozing…none have done that yet though I should make the rounds to check. In our early systems we batched as many inverters as possible under a single module (i.e. on a double row, with both pairs of inverters under the bottom row) so our return visits and replacements would be kept as simple as possible. I think it is still a good idea. We’ve had some where the trunk line connectors haven’t been tightly connected, but I think the new IQ 6 and 7’s are much more fool proof in all ways and I remain quite optimistic.
 
Bill Dorsett
    “Start where you are. Use what you have. Do what you can” Arthur Ashe
1715 Leavenworth
Manhattan, KS  66502
www.fhreec.org <http://www.fhreec.org/> 
 
785/539-1956  Office 
785/564-2583  Cell
wmdorsett at cox.net <mailto:wmdorsett at cox.net>     
 
From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of Ron Young
Sent: Monday, July 30, 2018 2:54 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] M210 Enphase
 
Good to know August and Bill, I’ll put in a call today.
 
Ron
earthRight Solar - Solareagle.com <http://Solareagle.com> 



On Jul 30, 2018, at 8:40 AM, August Goers <august at luminalt.com <mailto:august at luminalt.com> > wrote:
 
We have many M210 and M190 micros installed and deal with replacements frequently. If you're seeing physical signs of oozing or swelling, it's only a matter of time before they stop working. Enphase should replace them under warranty, especially if you explain that now is the time to get them swapped and show them the pics.
 
August
Luminalt
 
On Sat, Jul 28, 2018 at 8:08 AM Bill Hennessy <bill at berkssolar.com <mailto:bill at berkssolar.com> > wrote:
Ron, Give Enphase a call; replacements are usually sent without a hassle. They have a lot of experience replacing their older inverters. 



regards, bill
 
Bill Hennessy
Berks Solar, LLC
371 Centennial Rd
Mertztown, PA 19539

o 610 682 4300
c 484 560 4666
NABCEP certified installer
PA contractor #44411
www.berkssolar.com <http://www.berkssolar.com/> 
 

  _____  

From: RM You <solareagle at solareagle.com <mailto:solareagle at solareagle.com> >
To: RE-wrenches <re-wrenches at lists.re-wrenches.org <mailto:re-wrenches at lists.re-wrenches.org> > 
Sent: Friday, July 27, 2018 9:46 PM
Subject: [RE-wrenches] M210 Enphase
 
Anyone have a source of M210 Enphase inverters? I have a customer who has 3 out of 12 that are leaking and as he is getting his roof re-done would like to replace those before problems occur. They are still working properly but I don’t know the likelihood of failure. I could replace them with 215’s but the trunk cable plugs are different so would have to run a separate trunk cable for just those 3 unless there is an adapter. Any suggestions wildly appreciated ;) !
 
Ron
earthRight Solar - Solareagle.com <http://Solareagle.com> 
_______________________________________________
List sponsored by Redwood Alliance
 
List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org> 
 
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
 
List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
 
List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> 
 
Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org/> 
 
 
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org> 

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> 

Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org/> 
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org> 

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> 

Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org> 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180730/5e469101/attachment.htm>