[RE-wrenches] Wood pellet stove for off grid
Jay
jay.peltz at gmail.com
Thu Jun 21 11:50:44 EDT 2018
Hi david,
As someone who has a pellet stove, I wouldn’t buy another.
I’d go with a kerosene heater, direct vent.
Cheaper to operate, bulk fuel, cleaner, no mx, and probably uses less electrical energy and more efficient I think. ( no glow bar to start the burn cycle).
Jay
Peltz Power
> On Jun 21, 2018, at 7:39 AM, David Palumbo <palumbo131m at gmail.com> wrote:
>
> Wrenchsters,
>
> I am looking for advice on selecting the right wood pellet stove for an off grid house that will not be using regular firewood any longer.
> It will be in the basement so the appearance doesn’t matter.
> The home also has non electric LP gas heat. Looking for a secondary source for security and to guard against gas price increase.
> The home is 1,000 sq ft. 1-1/2 story (plus basement). Home has large air movement grates up to first and second floor for heat.
> Rental home – so reliable operation is valued
> Would like auto feed on pellet stove
> Low power draw is important as this is located in Vermont where the sun doesn’t shine much in the winter.
> I have heard that Harman stoves are high quality but they are expensive and owner doesn’t need the stove to look like it belongs in the living room.
>
> Thanks in advance,
> David Palumbo
> Hyde Park, Vermont
>
> Sent from Mail for Windows 10
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180621/81417b93/attachment.htm>
More information about the RE-Wrenches
mailing list