[RE-wrenches] Ilsco Insulated Tap Connectors
Ray
ray at solarray.com
Sat Jun 2 13:10:39 EDT 2018
I pulled up the Ilsco site. They are rated to 600 volts. That voltage
is AC and DC, unless it specifically says AC only. We've used them for
decades with DC. Check your voltage rating for THHN cable: it does not
say DC either.
Ilsco is also one of the few manufacturers to make flex cable rated
connectors. They have blue caps. This is what we should be using when
using higher strand count cables like Cobra X Flex.
Ray Walters
Remote Solar
303 505-8760
On 6/2/18 8:18 AM, Darryl Thayer wrote:
> I have heard AC DC no difference. However, I have experienced failure
> of these connectors via insulation softening in J boxes on the roof.
> The plastic is not thermal set and it will distort if pressured
> against the side of the box. This has never been a problem for
> interior wiring only in the solar case outside.
>
> On Fri, Jun 1, 2018 at 4:50 PM, James Rudolph
> <jamesrudolph99 at gmail.com <mailto:jamesrudolph99 at gmail.com>> wrote:
>
> Aloha Wrenches,
> Does anyone know if Ilsco Insulated Tap Connectors at DC rated?
> I looked on their cut sheet, and even called the Cincinnati and I
> was not able to confirm this?
>
> Does anybody know this, or have a better connector to use?
>
> Mahalo in advance,
>
> *James B. Rudolph*
>
> *Hawaii Unifed*
>
> *Director of Energy*
>
> *ES Electrician # 10816*
>
> *NABCEP Certified PV Installer # 091209-155*
>
> *808.594.9969*
>
> *
> *
> *
> *
>
> *
> *
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
> <mailto:RE-wrenches at lists.re-wrenches.org>
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> <http://www.re-wrenches.org/etiquette.htm>
>
> Check out or update participant bios:
> www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180602/ca0d17bd/attachment.htm>
More information about the RE-Wrenches
mailing list