[RE-wrenches] Fire damage

[Jerry Shafer]

Best to use a PV Analyzer to get accurate tests results
Jerry

On Fri, May 4, 2018, 7:07 AM Kristopher Schmid <solman at legacysolar.com>
wrote:

> Greetings wrenches,
>
> I have a client that is looking to buy some salvaged modules off of a
> building that was near a fire.  What kind of potential issues can you
> anticipate?  Smoke, heat, etc.  Would it be enough to just test voc and isc
> for a known cell temp and irradiance in addition to a visual inspection or
> would an iv curve trace be necessary?
>
> Thanks for any information,
> Kris
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180504/3c42f887/attachment.htm>