[RE-wrenches] Looking for insulated #6 bare standoff
MDElectricSolar
mdelectricsolar at gmail.com
Wed Apr 18 21:15:25 EDT 2018
Or just thhn #6 ?
Michael D Nelson
MD Electric & Solar, Inc.
707-684-0064 mobile
707-884-1862 office
www.mdelectricsolar.com
www.facebook.com/mdelectricandsolar
> On Apr 18, 2018, at 5:24 PM, Benn Kilburn <benn at skyfireenergy.com> wrote:
>
> Dana,
> Why does it have to be bare copper? Can you not use a green insulated #6?
>
> Benn Kilburn
> SkyFire Energy
> 780-906-7807
>
>> On Apr 18, 2018, at 10:59 AM, Dave Angelini Offgrid Solar <offgridsolar at sti.net> wrote:
>>
>> Why is it #6? Usually the solar panels wire size determine Array Teks size
>> for this wiring. What do they say please? --Dave
>>
>>> How about an insulated loop clamp like this one:
>>> https://www.fastenal.com/products/details/0216763
>>>
>>> You can get them in stainless and they have the rubber grommet so it won't
>>> touch the rack.
>>>
>>>> On Wed, Apr 18, 2018 at 12:00 PM, Dana <dana at solarwork.com> wrote:
>>>>
>>>> Good Morning Wrenches,
>>>>
>>>>
>>>>
>>>> I am required to keep the bare #6 copper from touching the aluminum
>>>> frame
>>>> work of a Array Technologies tracker where it is not mechanically
>>>> connected
>>>> by a pass-through ground clamp on a tracking array [dissimilar metals]
>>>> and
>>>> am looking for a lead on an insulated standoff or strap to hold the #6
>>>> bare
>>>> copper as it passes from panel to panel and rail to rail. The plans
>>>> examiner would accept pass through clamps & this is a worst case-spendy
>>>> solution to this.
>>>>
>>>>
>>>>
>>>> I have searched the inquired at local electrical warehouse &on the
>>>> internet and to no avail under “insulated strap” & “insulated
>>>> cable
>>>> standoff”.
>>>>
>>>>
>>>>
>>>> Has anyone else encountered his & what did you use? Where did you source
>>>> this strap?
>>>>
>>>>
>>>>
>>>> I remember seeing something like this in the fuzzy past & cannot recall
>>>> where I saw it or what it was for.
>>>>
>>>>
>>>>
>>>> Thanks for any suggestions.
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------
>>>> ----------------
>>>>
>>>> Dana Orzel Great Solar Works, Inc.
>>>>
>>>> *C - 208.721.7003 dana at solarwork.com
>>>> <dana at solarwork.com>*
>>>>
>>>> Idaho Contractor - # 028765 Idaho PV # 028374
>>>>
>>>> NABCEP # 051112-136 www.solarwork.biz
>>>>
>>>> *"Responsible Technologies for Responsible People since 1988" *
>>>>
>>>> *P* Please consider the environment before printing this email.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> List sponsored by Redwood Alliance
>>>>
>>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>>
>>>> Change listserver email address & settings:
>>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>>
>>>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
>>>> org/maillist.html
>>>>
>>>> List rules & etiquette:
>>>> www.re-wrenches.org/etiquette.htm
>>>>
>>>> Check out or update participant bios:
>>>> www.members.re-wrenches.org
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> *Will White*
>>> Curriculum Developer
>>>
>>> [image: Inline image 3]
>>>
>>> e: will at solarenergy.org
>>> w: www.solarenergy.org
>>> p: 802-272-3092
>>>
>>> PV Installation Professional
>>> # 093006-34
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>>
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> List-Archive:
>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>>
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>>
>>> Check out or update participant bios:
>>> www.members.re-wrenches.org
>>>
>>>
>>
>>
>> Dave Angelini Offgrid Solar
>> "we go where powerlines don't"
>> http://members.sti.net/offgridsolar/
>> e-mail offgridsolar at sti.net
>> text 209 813 0060
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
More information about the RE-Wrenches
mailing list