[RE-wrenches] Looking for insulated #6 bare standoff

[Dana]

Good Morning Wrenches,

 

I am required to keep the bare #6 copper from touching the aluminum frame
work of a Array Technologies tracker where it is not mechanically connected
by a pass-through ground clamp on a tracking array [dissimilar metals] and
am looking for a lead on an insulated standoff or strap to hold the #6 bare
copper as it passes from panel to panel and rail to rail. The plans examiner
would accept pass through clamps & this is a worst case-spendy solution to
this.

 

I have searched the inquired at local electrical warehouse &on the internet
and to no avail under "insulated strap" & "insulated cable standoff".

 

Has anyone else encountered his & what did you use? Where did you source
this strap?

 

I remember seeing something like this in the fuzzy past & cannot recall
where I saw it or what it was for.

 

Thanks for any suggestions. 

 

----------------------------------------------------------------------------

Dana Orzel                              Great Solar Works, Inc. 

C - 208.721.7003                       dana at solarwork.com

Idaho Contractor - # 028765         Idaho PV # 028374

NABCEP # 051112-136                       www.solarwork.biz
<http://www.solarwork.biz> 

"Responsible Technologies for Responsible People since 1988"  

P Please consider the environment before printing this email.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180418/a0b66001/attachment.htm>