[RE-wrenches] rail less standing seam attachments

[Jerry Shafer]

Jay
The S-5 PV kits do work, we have used them on many standing seam roofs, it
does take time to eleminate issues with wiring but it can be a clean roof.
Jerry

On Fri, Mar 30, 2018, 3:03 PM jay <jay.peltz at gmail.com> wrote:

> HI All,
>
> I’ve got a client who is set on wanting to do rail less racking.   I’m
> just working with him on overall design, hes doing the work.
>
> Its not a large system.  16 modules on two roof orientations, ( 4 on one,
> 12 on the other)  with offset modules.  Standing metal seam roof that is
> being installed with solar in mind,  lots of fasteners.
>
> Hes very competent and pays attention to details.
>
> Any positive/negative recommendations.
>
> thanks in advance,
>
> jay
>
> peltz power
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180404/a843c8ca/attachment.htm>