[RE-wrenches] Stuck in a furl
Ray
ray at solarray.com
Wed Mar 7 15:55:58 EST 2018
Primus Wind Power took over the Air X line, but they aren't doing the
Whisper equipment.
Ray
Remote Solar
On 3/7/18 1:06 PM, Starlight Solar Power Systems wrote:
> Mac,
>
> A company called Luminous Renewable Energy Solutions Pvt. Ltd. had taken over the SWWP line. My last email with them was in 2013. I notice that their website is not up but perhaps they sold or changed something.
>
> http://www.luminousrenewable.com/
> email rsen at luminousrenewable.com
>
> Larry Crutcher
> Starlight Solar Power Systems
>
>
>
>
>
>
> On Mar 7, 2018, at 12:42 PM, Mac Lewis <maclewis1 at gmail.com> wrote:
>
> Hello wrenches,
>
> I have a client with an older Whisper 200, 1 kW wind turbine. We didn't install this but have taken over the site maintenance since the original installer left town. The site recently experienced prolonged relatively high winds for 3-4 days. After that, he went out and noticed that the tail is stuck in the side-furling position.
>
> <image.png>
>
>
>
>
> I'm not very familiar with this turbine or wind turbines in general, but looking at a manual, it looks like we may need a new bushing or maybe even a new casting. Does anyone have any idea where I could order parts for this turbine? Is there a suitable replacement turbine we should be looking at? At last check, the turbine was putting out good power and passed all electrical checks.
>
> Thanks in advance for your expertise
>
>
> Mac Lewis
>
> "Yo solo sé que no sé nada." -Sócrates
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
More information about the RE-Wrenches
mailing list