[RE-wrenches] TJI rafters

[August Goers]

Hi All - We tie into TJIs commonly, if you Google "TJI solar" you'll find
manufacturer docs on how to properly lag in.

August

On Mar 2, 2018 1:24 PM, "Jerry Caldwell" <solarcowboy at yahoo.com> wrote:

> Dear Wrenches,
>
> I have a customer with a low slope roof supported by TJI beams. Does
> anyone have experience permitting and installing on TJIs? I'm curious if
> jurisdictions are requiring Structural Engineer stamps.
>
> Since the top chord of the beams is only 1 3/8" thick should we be using
> shorter lag bolts for these installations? It also seems that it would be
> undesirable to penetrate into the web of the beam.
>
> Any advice would be appreciated here.
>
> Thank you,
>
> Jerry Caldwell
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
> org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180303/267a9947/attachment.htm>