[RE-wrenches] TJI rafters

[frenergy]

Jerry,

             Metal roof? comp? tile?

Bill


On 3/2/2018 1:23 PM, Jerry Caldwell wrote:
> Dear Wrenches,
>
> I have a customer with a low slope roof supported by TJI beams. Does 
> anyone have experience permitting and installing on TJIs? I'm curious 
> if jurisdictions are requiring Structural Engineer stamps.
>
> Since the top chord of the beams is only 1 3/8" thick should we be 
> using shorter lag bolts for these installations? It also seems that it 
> would be undesirable to penetrate into the web of the beam.
>
> Any advice would be appreciated here.
>
> Thank you,
>
> Jerry Caldwell
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>

-- 
Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180302/0f138f5b/attachment.htm>