[RE-wrenches] Lorentz pumps

[John Blittersdorf]

Jay,

I have one on my own well 480’ down a 800’ deep well.  At the time, they
could only handle 500’ but since then have one that can pump from 1000’ and
more.  I only sold a few.  I did have to replace the circuit board on the
controller a couple of years ago and delt with a Lorentz dealer which seems
to be the major one located in Texas.
Overall, I have been impressed with the pump.  It turns 17 Year’s old this
year and started out as a direct solar pump with 4  100 watt panels but I
later connected it to a 48 volt system when a cabin was built near the
wellhead.

John Blittersdorf
Solar guru at Rob Stubbins  Electrical And Solar Contractors.


On Wed, Feb 28, 2018 at 3:39 PM jay <jay.peltz at gmail.com> wrote:

> HI All,
>
> I’ve got a client asking me about Lorentz pumps.
>
> I know they have sort of come and gone from the USA.
>
> Is anyone using them, have any pros/cons vs Grundfos and where to get them?
>
> thanks
>
> jay
>
> peltz power
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180301/e5733e44/attachment.htm>