[RE-wrenches] My .02 - 12/24v garage door opener.....

John john at gosolar.co.nz
Wed Jan 31 14:27:29 EST 2018


Hi all,   perhaps a bit of clarification might help.    1) the location of the garage is in a block of flats/units where all the garages are at the end of the row and it is not possible to get a.c. into the end unit of 4 garages without having to obtain permission of all the other 3 garage owners, which has its own complications and is highly unlikely.
2) it is not being approached as a *cost saving* measure as someone suggested.  It is merely a practical application where a.c. is not available.
3) another person mentioned that it is high energy use for a short time, therefore the total energy per day is low.
4) am I to understand that there is no readily available *off-the-shelf* solution for a 12/24v garage door opener??

Thanks for the input - John V

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

-----Original Message-----
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Dave Angelini Offgrid Solar
Sent: Thursday, 1 February 2018 7:42 a.m.
To: RE-wrenches
Subject: Re: [RE-wrenches] My .02 - 12/24v garage door opener.....

Not even going to mention building code and running DC wiring outside of the area (battery/inverter/chargers location) an inspector would allow.
Even some of the very rural/extreme remote counties I work in know that they are ill-equipped to inspect DC wiring. Some will tell you there is no inspection for offgrid homes but if there is a fire they will say they told the installer no DC wiring except in the area of the battery.


Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail  offgridsolar at sti.net
text 209 813 0060


> Wow, this is flash from the past…  I had almost forgotten about 
> running DC in a house or garage.
>
> With todays inverter efficiency’s & costs VS. the cost of proper DC 
> wire sizing, garage lighting?, & having to modify a reliable lift system, etc.
>
> Is there really a cost savings in the longs run?
>
>
>
> It’s a garage, are you going to need to run any AC tools, battery 
> chargers?
>
> I mean it is a potential man cave, really now….
>
>
>
> ----------------------------------------------------------------------
> ------
>
> Dana Orzel                              Great Solar Works, Inc.
>
> C - 208.721.7003                       dana at solarwork.com
>
> Idaho Contractor - # 028765         Idaho PV # 028374
>
> NABCEP # 051112-136                        <http://www.solarwork.biz>
> www.solarwork.biz
>
> "Responsible Technologies for Responsible People since 1988"
>
> P Please consider the environment before printing this email.
>
>
>
>
>
> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] 
> On Behalf Of Darryl Thayer
> Sent: Wednesday, January 31, 2018 3:46 AM
> To: newrewrenches <RE-wrenches at lists.re-wrenches.org>
> Subject: Re: [RE-wrenches] 12/24v garage door opener.....
>
>
>
> I have measured the energy used by a garage door opener on more than 
> one occasion.  they draw a fair amount of power while operating, 
> however. they don't draw power otherwise so the total energy is very 
> low.  I am wondering if a low cost non pure sine inverter to AC 
> operated off the switches which would be low voltage would not serve 
> the same low energy use and reliability of a DC garage door opener
>
>
>
> On Jan 31, 2018 2:39 AM, "John" <john at gosolar.co.nz 
> <mailto:john at gosolar.co.nz> > wrote:
>
> Hi all,   any recommendations where to find 12 or 24v garage door openers.
>    Can’t remember this coming up on the list beforehand.   It is just
> for a single car garage door.    Don’t want to use an inverter, usually
> better to go direct to a dc motor.
>
> Once I have a suitable opener, I can design the rest of the system 
> around it.
>
> Thanks for any/all input.                               John Veix,
> GoSolar Ltd,   N.Z.
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org 
> <mailto:RE-wrenches at lists.re-wrenches.org>
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist
> .html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> <http://www.re-wrenches.org/etiquette.htm>
>
> Check out or update participant bios:
> www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist
> .html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>


Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail  offgridsolar at sti.net
text 209 813 0060

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org



More information about the RE-Wrenches mailing list