[RE-wrenches] Air X Turbine with Positive Ground

[James Jefferson Jarvis]

On 1/19/2018 4:33 PM, Ray wrote:
> Great,  I had no idea you all added a wind turbine to your line up. I'm 
> still waiting to hear back from Primus, but it doesn't look good.  Even 
> though they advertise it works for telecomm,  another wrench contacted 
> me privately, and said that the previous owner Southwest Wind Power told 
> him it would NOT work with positive ground systems, which precludes most 
> telecom.

But not cool that large chunks of Midnite's specifications and marketing 
material for their Diversion Load are verbatim copy and pastes from my 
company's DL300 that we have been producing since 2008.

Midnite's manual:
http://www.midnitesolar.com/pdfs/CHINOOK200_DIVERSION_LOAD_MANUAL.pdf

Our web page:
http://www.aprsworld.com/dl300/

Our web page in 2010, as archived by the Internet Archive:
https://web.archive.org/web/20100720004704/http://aprsworld.com/dl300/


Second source, clone, or compatible products are common in industry. But 
usually the cloner doesn't use the exact same words and formats and 
order when they make their datasheet.

I guess since boB is plugging his wind turbine on re-wrenches, I'll also 
mention that APRS World's WT10 and WT14 and HR3 wind turbines will work 
with positive ground systems:
http://www-dev.aprsworld.com/wtaprs/

Thanks,

-- 
-James Jefferson Jarvis
APRS World, LLC
+1-507-454-2727
www.aprsworld.com