[RE-wrenches] Schneider 600volt Charge Controller

[cwarfel]

We have had two in the field for two years with noproblems.  They 
allowed us to run 375feet with conductors that was substantially smaller 
than what would have otherwise been possible. Chris


On 1/18/2018 12:34 PM, Mac Lewis wrote:
> I'll vouch for Schneider's 600A charge controller as well.  We don't 
> have as many as Dave has out there but no failures.  Seems to be a 
> solid device.  Works well with the PDP too.
>
> Good Luck!
>
> On Thu, Jan 18, 2018 at 10:15 AM, Howie Michaelson 
> <Howie.Michaelson at gmail.com <mailto:Howie.Michaelson at gmail.com>> wrote:
>
>     Boy, that would be a bonus! I like sticking with products that
>     have worked for me, although I am intrigued by the XW 600vDC.
>
>     Any word on the release date for Midnite's inverter?
>
>     On Thu, Jan 18, 2018 at 11:51 AM, <penobscotsolar at midmaine.com
>     <mailto:penobscotsolar at midmaine.com>> wrote:
>
>         FYI Howie,
>            Schneider engineers are actively working on a communication
>         solutions
>         between the Schneider Xanbus and Midnite controllers. I've
>         been talking
>         to an engineer working on it who says it should be ready very
>         soon. It
>         will also work with the combox for remote monitoring.
>
>         Daryl
>
>
>         > Hi All,
>         > Anyone have feedback/review of the 600 volt Schneider Charge
>         Controller
>         > that they'd care to share?  I have an existing Conext XW+
>         off-grid system
>         > with combox communication setup which currently has about
>         1.5 kW of solar
>         > feeding through 2 MX60s (no hub). We'll be adding about 5kW
>         (on a TPM
>         > about
>         > 150' away) and I'm trying to decide if overall it would be
>         better to use
>         > the Schneider 600v (which I haven't used before, although I
>         have serviced
>         > the 150v XW with no real complaints). Typically I would use
>         a Classic200,
>         > but given the ability to integrate with the XW6848 and
>         communicate through
>         > the Combox for more offsite visibility, I'm considering the
>         Schneider, but
>         > only if it's not going to provide me with the benefit of
>         added service
>         > calls.
>         > TIA!
>         > Howie
>         > _______________________________________________
>         > List sponsored by Redwood Alliance
>         >
>         > List Address: RE-wrenches at lists.re-wrenches.org
>         <mailto:RE-wrenches at lists.re-wrenches.org>
>         >
>         > Change listserver email address & settings:
>         >
>         http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>         <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
>         >
>         > List-Archive:
>         >
>         http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>         <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
>         >
>         > List rules & etiquette:
>         > www.re-wrenches.org/etiquette.htm
>         <http://www.re-wrenches.org/etiquette.htm>
>         >
>         > Check out or update participant bios:
>         > www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>         >
>         >
>
>
>         _______________________________________________
>         List sponsored by Redwood Alliance
>
>         List Address: RE-wrenches at lists.re-wrenches.org
>         <mailto:RE-wrenches at lists.re-wrenches.org>
>
>         Change listserver email address & settings:
>         http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>         <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
>
>         List-Archive:
>         http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>         <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
>
>         List rules & etiquette:
>         www.re-wrenches.org/etiquette.htm
>         <http://www.re-wrenches.org/etiquette.htm>
>
>         Check out or update participant bios:
>         www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>
>
>
>     _______________________________________________
>     List sponsored by Redwood Alliance
>
>     List Address: RE-wrenches at lists.re-wrenches.org
>     <mailto:RE-wrenches at lists.re-wrenches.org>
>
>     Change listserver email address & settings:
>     http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>     <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
>
>     List-Archive:
>     http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>     <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
>
>     List rules & etiquette:
>     www.re-wrenches.org/etiquette.htm
>     <http://www.re-wrenches.org/etiquette.htm>
>
>     Check out or update participant bios:
>     www.members.re-wrenches.org <http://www.members.re-wrenches.org>
>
>
>
>
>
> -- 
>
>
>
> Mac Lewis
>
> *
>
> "Yo solo sé que no sé nada." -Sócrates
>
> *
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>

-- 
Christopher Warfel, PE
Entech Engineering, Inc.
401-466-8978

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20180118/9e3e9921/attachment.htm>