[RE-wrenches] Wire management with S5! Railless System

[Jay]

Hi Ray

Here are a ton of newer clips that carry 2-many wires, in different configurations, straight, 90 degree etc
Most in SS some now in synthetic. 
And yea it’s kind of a pain with that type racking. 


Talk to Bryan at PV cables, he stocks lots of them. 
707-923-3000

Jay
Peltz power

> On Jan 10, 2018, at 9:18 PM, Ray <ray at solarray.com> wrote:
> 
> Hi All;
> 
> I was wondering what folks were doing these days for wire management on Standing seam roofs with the S5! clamps and no rails. I'm at a loss (once again) for how to secure the home runs without a rail.  I have some of those module edge clips, but those only hold one wire, and I've had them slip off (wire dangling visible from ground.)
> Also most suppliers seem to only carry the universal S5! clamps, but I have found those to really bend up the metal on certain types of standing seam roofs.  I wanted to order the recommended model for the particular roof.  AEE quit carrying S5 altogether.
> Give me your Standing seam wisdom.
> 
> Thanks,
> 
> Ray Walters
> Remote Solar
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
>