[RE-wrenches] battery buss bar stock

[Matthew Sirum]

Greetings Jay,

I second the Storm Power Components (formerly Storm Copper)
recommendation   https://stormpowercomponents.com/

In addition to Storm you may also like to take a look at:

Farmers Copper http://www.farmerscopper.com/

Watteredge Products (now renamed as parent company Southwire)
http://www.watteredge.com/

Electric Equipment & Engineering Company (EEE) http://eeeusa.com/
EEE manufactures interconnects, bus bars, terminal plates, and etc for
some of the industrial battery system companies.  If you are looking
for cell interconnects for stringing 2-volt cells together they may be
a resource.

You may remember the custom DC bus system pictures I shared with you a
while back; I sourced the large DC battery system circuit breakers
from EEE and the C11000 copper bar stock and insulators came from
Storm.  Here is the last contact I had with EEE: Mike Morroni, phone:
303.296.1476 ext: 21, email: mike.morroni at eeeusa.com

As Tump mentioned, McMaster-Carr as well as Grainger and MSC also sell
copper stock.

Best regards,

----MATT

Matthew Sirum
P.O. Box 1227
Greenfield, MA 01302-1227  USA
phone: +1.413.773.0611
email: MatthewSirum at gmail.com


      ----------  Original Message Below  ----------

[RE-wrenches] battery buss bar stock

jay jay.peltz at gmail.com
Fri Dec 1 08:06:00 PST 2017

HI All,

I’m wondering if anyone has a good source for battery buss bar stock.
Either pre made ones or stock I can use to make myself.

It would be for larger Rolls GEL 2v in this case but other battery
sizes/types as well.

thanks

jay

peltz power