[RE-wrenches] Outdoor rated insulation covering for Solar Water Heating Systems

[Solar Energy Solutions]

We use a 2 inch 3M scotch tape all weather corrosion protected tape. For long exterior plumbing run we will insert a piece of pipe into the insulation and then pre-wrap our 6 foot sections of insulation With an overlapping spiral. 



Andrew Koyaanisqatsi
President
Solar Energy Solutions, Inc.
The BRIGHT CHOICE

Since 1987, helping you and your 
Portland neighbors move towards an environmentally sustainable future.

503-238-4502
www.SolarEnergyOregon.com

> On Nov 3, 2017, at 8:06 AM, cwarfel <cwarfel at entech-engineering.com> wrote:
> 
> I would like to add a covering to the Armorflex insulation we installed on a solar water heating system. Can anyone recommend a manufacturer's product that a reasonably competent person can install?  Right now we have wrapped the insulation in UV resistant tape, but it doesn't look all that great.  Thank you, Chris
> 
> -- 
> Christopher Warfel, PE
> Entech Engineering, Inc.
> 401-466-8978
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
>