[RE-wrenches] adjustable back legs for mounts

[Ray]

We've also made them from Unistrut nested into square tubing. Drill a 
hole close to the top of the square tube and use a 3/8" bolt and strut 
nut.  Either 1-3/4" or 2" thin wall Square tube works.

Ray Walters


On 10/24/17 7:57 PM, Allan Sindelar wrote:
> Try Jeff Randall at RC Fab in Albuquerque. jeff at solarrackworks.com,
> ‭(505) 288-5552‬.
>
> Allan
>
>> On Oct 24, 2017, at 4:48 PM, jay <jay.peltz at gmail.com> wrote:
>>
>> Hi All,
>>
>> I’m having trouble finding adjustable slide style back legs for a client who wants to adjust his low profile array.
>> I can’t find them from Iron Ridge, Unirack, DPW,
>>
>> Where/who can I get them from?
>>
>> thanks
>>
>> jay
>>
>> peltz power
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>