[RE-wrenches] breaker instead of fused disco

[jay]

I would imagine that if the breaker and enclosure had the correct AIC ratings it should work.  
But its PG&E, enough said.

jay

peltz power
> On Oct 3, 2017, at 10:21 AM, Jerry Caldwell <solarcowboy at yahoo.com> wrote:
> 
> Dear Wrenches with experience in PG&E territory:
> I'm installing a system with a line side tap.  Can I use a small subpanel with room for only one circuit breaker instead of a fused disconnect?  The NEM application, step 2 requires you to select a fused disconnect from their list of approved devices.  Does anyone have experience with PG&E granting a variance on this requirement?
> 
> Thanks in advance.  Any help is appreciated.
> Jerry Caldwell510.205.2798
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
>