[RE-wrenches] Rapid Shutdown equipment restart. BH, Combiner and battery disco.

bob at midnitesolar.com bob at midnitesolar.com
Tue Jul 26 20:50:07 EDT 2016


Jeremy, normally the way to reset the birdhouse RSS is to flip the
PV combiner switch with the red handle on it, OFF and then back ON.

Also...
*
**1-Make sure there is 120VAC to BirdHouse and it doesn=E2=80=99t say =E2=
=80=9CBattery Low=E2=80=9D
**
**2-Reset combiner (Birdhouse should say =E2=80=9CThe solar system has been=
=20
turned on=E2=80=9D or something to that nature)**
**
3-Reset the breaker that was tripped by the BDM.


What are you finding that is finicky about the Battery Disconnect Module=20
(MNBDM) ?

The BDM is powered from the inverter side of the battery breaker, right=20
? Otherwise it
will keep trying to trip.

Thanks,
boB

*

On 7/25/2016 8:48 PM, Jeremy Rodriguez wrote:
> Could someone please explain the sequence of re setting a system with a M=
idnite Birdhouse, disconnecting combiner, and battery disconnect module.
> I mean, once the system is activated what is the correct sequence of re s=
etting and turning the equipment back on, whether AC power to the birdhouse=
 is lost or not..,..
> Seems like the battery disconnect module is most finicky.
>  =20
> Jeremy Rodriguez
> Solar Installation And Design Expert
> All Solar, Inc.
> 1463 M St
> Penrose Colorado 81240
>
> Sent by Jeremy's iPhone. Sorry for typos and shorthand!
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.o=
rg/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.=
org/attachments/20160726/67f2cfaa/attachment.htm>


More information about the RE-Wrenches mailing list