[RE-wrenches] DC circuit breakers in parallel

[Richard L Ratico]

And perhaps, size each of the conductors for the entire 95 Amps. 
Dick Ratico
Solarwind Electric

--- You wrote:
Use a good "pin" to lock them together.  Make sure they can't
disengage (lock-tite the hardware, etc.) and you're good to go.

Stay warm out there (ha!).

Dan

--- On Wed, 2/27/13, Larry Crutcher, Starlight Solar Power Systems
<larry at starlightsolar.com> wrote:

From: Larry Crutcher, Starlight Solar Power Systems <larry at starlightsolar.com>
Subject: Re: [RE-wrenches] DC circuit breakers in parallel
To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
Date: Wednesday, February 27, 2013, 2:17 PM

Hi Dan,
NEC does not apply to mobile systems. Thus the reason for asking about "safe and
reliable" instead of code compliant. 

Thank you,
Larry CrutcherStarlight Solar Power Systems




On Feb 27, 2013, at 11:56 AM, <dan at foxfire-energy.com> <dan at foxfire-energy.com>
wrote:
Check out NEC 240.8
db


Dan Brown
Foxfire Energy Corp.
Renewable Energy Systems
(802)-483-2564
www.Foxfire-Energy.com
NABCEP #092907-44

--- end of quote ---