[RE-wrenches] Morningstar relay driver configuration help

[Nathan Jones]

Wrenches,
I am trying to configure a Morningstar relay driver and am not sure I have the 
setpoints in the right sequence. I have the settings loaded into a file on the 
laptop with progressively higher battery voltages triggering more diversion 
loads but I'm not sure I have the correct order for this to occur. I started 
with channel 2 as the first trigger point and then used channel one as a second, 
or higher battery voltage diversion. Does it matter which channel is used 
progressively or will it default to whatever setting regardless of which 
channel?
I would like to know I have this thing right so I don't have to field configure. 
Any input is appreciated as I have never used one of these units.
Thanks,
Nathan Jones
Power Source Solar
417 827 0738
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/attachments/20110413/c63b33dc/attachment.htm>