Gunite on modules [RE-wrenches]

[Jeff Oldham]

I think the acid that is suggested should be Muriatic not Hydrochloric. I've always used Muriatic. I sure would expect some frame etching though. I like the soaked rag idea - good one! I would try to use a putty knife or razor blade to scrape off as much as possible before dropping acid. But the best of all is to get the culprits to deal with it!
 
Good luck,
-jeff


>From the Solar, Wind and Hydro powered office of Jeff Oldham/Regenerative SOLutions


_____________________________________________________________
Click here to find the right stock, bonds, and mutual funds.
http://track.juno.com/s/lc?u=http://tagline.untd.us/fc/CAaCX09nslLfFWwvFKWareHPWM2ccpCi/

[Non-text portions of this message have been removed]


- - - -
Hosted by Home Power magazine

To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------