Secure modules [RE-wrenches]

[Jeff Oldham]

I often use hex head bolts or drill point screws and take a grinder to the heads and muck up the head, it takes maybe 3- 5 seconds a head to do the job, I then only do one per module, much like a locking lug on a wheel - you only need one to stay in place.
Bob-O's solution is a damn fine one but a bit expensive. If you want the fancy tamper resistant hardware I found the best prices at: http://www.tamperproof.com/tamperproof-screws.cfm They will sell direct and #10 x 2" SS sheet metal screws are $38/100.
All in all, I've been amazed at the overall lack of module rip-offs in the nearly 30 years I've been around them.
-jeff o


>From the Solar, Wind and Hydro powered office of Jeff Oldham



________________________________________________________________________
Try Juno Platinum for Free! Then, only $9.95/month!
Unlimited Internet Access with 1GB of Email Storage.
Visit http://www.juno.com/value to sign up today!

[Non-text portions of this message have been removed]


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------