Old Siemens Solar Training Guide [RE-wrenches]

[Jeff Oldham]

If you can find one it will be mighty dusty, chewed by mice and somewhat outdated. As I recall that was back before much line-tie systems were in place. You might try Arthur Ruden now at Sharp Solar in the So. Cal office, as he was the brainchild of the Siemens Training program.
As an alternative I would suggest the excellent manual put together for Bill Brooks' former (?) class on installs titled "Designing and Installing Code Compliant PV Systems". This was done for the CEC under contract w/Endecon. Perhaps Bill could chime in on how to go about securing one of these treasures....
Finally, check out what www.solarliving.org has to offer.
Good luck!
-jeff o


>From the Solar, Wind and Hydro powered office of Jeff Oldham



________________________________________________________________________
Try Juno Platinum for Free! Then, only $9.95/month!
Unlimited Internet Access with 1GB of Email Storage.
Visit http://www.juno.com/value to sign up today!

[Non-text portions of this message have been removed]


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------