[RE-wrenches]

[Vince McClellan]

I was wondering if anyone on the wrenches list might know where I can find a hold
down kit for a Murry 15 amp 2 pole circuit breaker as required in NEC article
408.16 F.
I have tried all my local sources and the only thing I could find was a small
plastic 
clip that only works for breakers over 70 amps. My inspector wants to see any
back fed circuit breaker such as with a grid tie PV system held in place
. 
It seems to me that NEC article 408.16 F was not written with grid tie inverters
in mind because as soon as you disconnect the circuit breaker the inverter stops
powering the breaker anyway. 

Thanks

Vince McClellan

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------