Inverter/genset problem [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>>Yo Kurt ETAL,

Actually, Trace DOES have a problem with it, at least according to 
their SW manual. I've done a few that way with no problems, but I 
guess ya never know. Putting the house loads on one leg and the 
charger on the other sure helps to keep a 120/240ac only genny in 
better balance if you've got no other choice.
Merry Christmas!
Bob-O

> >
>Hey Bob-O,
>
>I have used the external transfer switch "work-around" that you once
>mentioned to me.  It seems to work well in some systems, especially if a
>T-120 is not large enough to handle the job.  I have mentioned it in the
>past on the list and the wrenches don't seem warm to the concept.  Trace
>doesn't seem to have a problem with it, do you still offer it as an
>option?  (Todd transfer switch between the gen-set and the inverter -
>transfers the home loads to one leg of the gen-set and runs the other
>leg to the Trace, which after loosing the loads, is essentially only a
>battery charger).
>
>Kurt Nelson
>

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

___________________________________________________________
T O P I C A  http://www.topica.com/t/17
Newsletters, Tips and Discussions on Your Favorite Topics

</x-flowed>