Dual DR's [RE-wrenches]

Chris Daum info at oasismontana.com
Tue Dec 19 17:42:19 EST 2000


Hi Folks:  In my initial system, I had a DR1524 running my Vestfrost 
'fridge, computer, scanner and printer.  I'd had the Vestfrost for about 4 
years (I'm on grid, but we do have regular power outages) when I added a 
small solar array and the DR1524.  I have a separate sub-panel just for the 
inverter loads.  For the first time in 4 years the 'fridge made much more 
noise, and ran hotter. Now, even if I put the unit back on grid, it's still 
pretty noisy (but there's less heat generated on the outside of the unit).

The DR1524 ran my computer, scanner and printer just fine, though there was 
a buzz in the computer's speakers.  Since I'm a bit of an audiophile, I was 
loathe to try my stereo with the unit....

I've recently upgraded to a PS2524 and that sucker is LOUD.  I'm glad it's 
in the garage, as it would definitely be prohibitively noisy in a living 
space.

As always, I enjoy your volumes of information!  It's very helpful.

Chris Daum
Oasis Montana Inc.

On Tuesday, December 19, 2000 2:59 PM, Ray Walters 
[SMTP:remotech at taosnm.com] wrote:
> Hi Phil;
>
> I too have had amazing results from my DR2424: air compressor, band saw,
> drill press, heat gun,all going still no glitches on the computer and my
> partner microwaving up leftovers while the girls watch videos. In 5 years
> of abuse, I have never overloaded it. Strangely the SW5548 seems to
> overload easier: More sensitive electronics?
> 	Also, has anyone had sound attenuation problems with the PS series?
> Another installer said the transformer buzzes as loud as a lawn mower and
> didn't reccomend installing the PS series within a dwelling.
>
> Ray Walters
> Remote Tech
>
>  I have At 09:27 AM 12/19/00 -0800, you wrote:
> >    I have used a DR2424 at my home for 5-6 years with no
> >problems/complaints.  It has run simultaneously a cement mixer, tile saw 
and
> >air compressor (old, well-worn Emglo brand) during a work party I had 
last
> >summer when someone kicked on the microwave.  I waited with anxious
> >anticipation, and it handled the load.  But it won't run the new
> >Porter-Cable air compressor I ran out to buy after that event.  Neither 
will
> >my generator.  (anyone want a great deal on a barely used air 
compressor?)
> >    I added a Exeltech 250 for the audio equipment and VFD pager 
recharger
> >last year.  My stereo never buzzed on the mod sine, but a  VCR and a
> >microwave both went keput, and I suspect but cannot prove that its from 
the
> >mod sine.
> >    I gave a thought to replacing the DR with a PS when they came out, 
but I
> >don't like that it comes minus a display, and we have had sketchy 
results
> >with using the remote display in the field.
> >    Ultimately, I decided why fix what ain't broke, I got enough work to 
do
> >on the house as is.
> >Phil
> >Positive Energy
> >
> >----- Original Message -----
> >From: John Blittersdorf, Cent. VT Solar & Wind <cvsolar at aol.com>
> >To: <RE-wrenches at topica.com>
> >Sent: Tuesday, December 19, 2000 6:18 AM
> >Subject: Re: Dual DR's [RE-wrenches]
> >
> >
> >> In a message dated 12/18/00 11:23:41 AM Eastern Standard Time,
> >> windy at dankoffsolar.com writes:
> >>
> >> << I would however hesitate on grounds of "mod" sine wave. People who
> >>  have a materially simple lifestyle do very well with DR's (like
> >>  people who have been living for years with little or no electricity).
> >>  People with more electronics had better stick to sine wave. The
> >>  trouble is, it's hard to predict who will start out in the first
> >>  category and quickly transform into the second. >>
> >>
> >> Windy,
> >>   Thanks for getting me back on track.  You hit the nail on the head 
with
> >> that last sentence.  Most of my customers who started out minimal 
wanted
> >> more.  (ie the 12v cabin owner who was happy for lights without using 
gas
> >> lights and who now wants an inverter to run the glow bar on the new 
gas
> >stove
> >> and the computer.)
> >>
> >> John
> >> CVSolar
> >>
> >> - - - - - - -
> >> To send a message:
> >>  RE-wrenches at topica.com
> >>
> >> The archive of previous messages:
> >>  http://www.topica.com/lists/RE-wrenches/
> >>
> >> To unsubscribe send a message to:
> >>  RE-wrenches-unsubscribe at topica.com
> >>
> >> To check out the other RE-Wrench participants:
> >>  www.mrsharkey.com/wrenches/index.html
> >>
> >> Hosted by Home Power magazine:
> >>  www.homepower.com
> >>
> >> For info contact list moderator by email:
> >>  michael.welch at homepower.com
> >>
> >> ___________________________________________________________
> >> T O P I C A  http://www.topica.com/t/17
> >> Newsletters, Tips and Discussions on Your Favorite Topics
> >>
> >
> >- - - - - - -
> >To send a message:
> > RE-wrenches at topica.com
> >
> >The archive of previous messages:
> > http://www.topica.com/lists/RE-wrenches/
> >
> >To unsubscribe send a message to:
> > RE-wrenches-unsubscribe at topica.com
> >
> >To check out the other RE-Wrench participants:
> > www.mrsharkey.com/wrenches/index.html
> >
> >Hosted by Home Power magazine:
> > www.homepower.com
> >
> >For info contact list moderator by email:
> > michael.welch at homepower.com
> >
> >___________________________________________________________
> >T O P I C A  http://www.topica.com/t/17
> >Newsletters, Tips and Discussions on Your Favorite Topics
> >
> >
>
> - - - - - - -
> To send a message:
>  RE-wrenches at topica.com
>
> The archive of previous messages:
>  http://www.topica.com/lists/RE-wrenches/
>
> To unsubscribe send a message to:
>  RE-wrenches-unsubscribe at topica.com
>
> To check out the other RE-Wrench participants:
>  www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine:
>  www.homepower.com
>
> For info contact list moderator by email:
>  michael.welch at homepower.com
>
> ___________________________________________________________
> T O P I C A  http://www.topica.com/t/17
> Newsletters, Tips and Discussions on Your Favorite Topics
> 

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

___________________________________________________________
T O P I C A  http://www.topica.com/t/17
Newsletters, Tips and Discussions on Your Favorite Topics



More information about the RE-Wrenches mailing list