SW search mode [RE-wrenches]

[Don Loweburg, Offline]

In a message dated 11/13/2000 9:01:05 AM Pacific Standard Time, 
sunwise at win.bright.net writes:

<<  This occurs when the AC1 is
 disconnected, though the line-tie LED some times stays on even though
 the AC1 LED (and breaker) is off.  Could this be related to the problem?
 
 I convinced the client to elminate phantom loads and after all those
 efforts, the Trace won't snooze.  They're not real happy about it...
 
 Thanks for any thoughts -- Kurt Nelson
  >>
Hi 'Kurt,  I don't know about the AC1 LED light and any interaction with 
search mode- a bit strange.  On the issue of search mode in general--It's 
pretty sloppy.  Sometimes you are lucky to make it work at all - at any 
setting. I assume your customer can not live with the higher threshold 
setting. because that would me my recommendation.

Don L

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

___________________________________________________________
T O P I C A  http://www.topica.com/t/17
Newsletters, Tips and Discussions on Your Favorite Topics