GC batteries [RE-wrenches]

[Don Loweburg, Offline]

In a message dated 10/24/2000 8:29:33 PM Pacific Daylight Time, 
sunwise at win.bright.net writes:

<< Wondering if this could be another case of Trace vapor-ware.  Initiating
 an EQ with a Trave WS4024 ain't that easy, and if you do it the way the
 manual says you should, it won't work (it will go into a regualar charge
 cycle).  If you are sure you are intiating the EQ, what EQ settings are
 us using.  Any time you get back to a default, you're not equalizing.
 
 Kurt Nelson
  >>
Not trusting the EQ, what I do is temporaily change the bulk voltage set 
point higher, run a couple of cycles, then return  bulk settings to normal. 
Not fancy but I know what is happening this way.

Don

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics