failure of auto gen stop [RE-wrenches]

[Clive Wilkins, PowerSense]

Clive,
We don't use this model in the US, but I suspect the logic is the
same.  Even tho' the manual says so, the max run time setting doesn't
shut off the gennie, it just sends an error message.  Learned this
from tech support.  .

Hi Allan

thanks for responding.  Logic is the same, yes.  Visited site today,
have increased absorption time on the charging menu and will see what
happens.

<<<<Re the load shutoff--what's your load stop delay set to?  That's
the only variable that may give you unexpected results.  I believe the
default is 5 minutes>>>


Yes is set at five minutes but gen still didn't go off. Probably
because charge parameters hadn't been met (after eight hours gen run
time).  I get frustrated when products don't match the spec...



<<<<<<By the way, do your "Menu Heading" arrow buttons on the control
panel work backwards, like ours do here???>>>>>>

Yes they do - even though the bath water goes the opposite way to
yours down the plughole, being the southern hemisphere  :)


cheers

Clive

Clive Wilkinson
PowerSense
Falkland Islands



powersense at horizon.co.fk
http://www.falklandwool.com

tel   +500 42202
fax  +500 42203






- - - - - - -
To send a message to the list use: <RE-wrenches at topica.com>

To view an archive of previous messages go to: <http://www.topica.com/lists/RE-wrenches/

To unsubscribe send an email message to: <RE-wrenches-unsubscribe at topica.com>

To check out who the other RE-Wrench participants are, go to <http://www.mrsharkey.com/wrenches/>

Hosted by Home Power magazine: <http://www.homepower.com>

for info contact: <michael.welch at homepower.com>
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics